HazwoperTraining.com
8 HOUR HAZWOPER

8 Hour HAZWOPER Refresher With Wallet ID Card

Meets Federal and State OSHA HAZWOPER refresher training requirements

8 Hour HAZWOPER Refresher Course Completion Card

Overview

Who Should Take This Course?

Students with 24- or 40-hour OSHA HAZWOPER certification are required by OSHA to refresh their certification every year. The OSHA 8 Hour HAZWOPER Refresher course meets the requirements to refresh these certifications.

There are several versions of this course to choose from, each with a different focus. Click on the Course Topics tab and click on each of the versions buttons to view the course content for each of these courses. No matter which version you choose, you will receive the same HAZWOPER Refresher certification.

This course includes a PVC wallet ID card (with or without photo). Adding a photo after enrollment will cost an additional $10.

Objectives

The objectives for this course are to meet the Federal OSHA HAZWOPER training requirements of 29 CFR 1910.120(e)(8), CFR 1910.120(p)(7)(i), or 29 CFR 1910.120(q)(8) for General Industry, and 29 CFR 1926.65(e)(8), 29 CFR 1926.65(p)(7)(i), or 29 CFR 1926.65(q)(8) for Construction. This course is also intended to meet any HAZWOPER training requirements for EPA and State OSHA regulations..

Per 29 CFR 1910.120(e)(8) and 29 CFR 1926.65(e)(8)

Employees specified in paragraph (e)(1) of this section, and managers and supervisors specified in paragraph (e)(4) of this section, shall receive eight hours of refresher training annually on the items specified in paragraph (e)(2) and/or (e)(4) of this section, any critique of incidents that have occurred in the past year that can serve as training examples of related work, and other relevant topics.

Per 29 CFR 1910.120(p)(7)(i) and 29 CFR 1926.65(p)(7)(i)

The employer shall develop and implement a training program which is part of the employer’s safety and health program, for employees exposed to health hazards or hazardous substances at TSD operations to enable the employees to perform their assigned duties and functions in a safe and healthful manner so as not to endanger themselves or other employees. The initial training shall be for 24 hours and refresher training shall be for eight hours annually. Employees who have received the initial training required by this paragraph shall be given a written certificate attesting that they have successfully completed the necessary training.

Per 29 CFR 1910.120(q)(8) and 29 CFR 1926.65(q)(8)

Those employees who are trained in accordance with paragraph (q)(6) of this section shall receive annual refresher training of sufficient content and duration to maintain their competencies, or shall demonstrate competency in those areas at least yearly.

Topics

Version 1 Includes: Legal Issue and Chemical Hazards

This version consists of 16 sections broken down into 3 modules. Students are required to take each section in sequential order as listed below.

Module Section Title
Course Introduction 1 Course Overview
Module 1 – Legal Issues 2 Module Overview
3 Introduction to OSHA
4 Introduction to HAZWOPER
5 HAZWOPER Training
6 Regulatory Compliance
7 Safety and Health Program
8 Medical Surveillance
Module Exam
Module 2 – Chemical Hazards 9 Module Overview
10 Introduction to Industrial Hygiene
11 Introduction to Biological Hazards
12 Hazard Communication
13 Physical and Chemical Properties
14 Introduction to Radiation
Module Exam
Module 3 – Decon and Conclusion 15 Decontamination
16 Summary and Conclusion

Version 2 Includes: Toxicology and Waste Site Operations

This version consists of 18 sections broken down into 2 modules. Since they often build on one another, sections are taken sequentially in the order listed below.

Module Section Title
Course Introduction 1 Course Overview
Module 1 – Toxicology 2 Module Overview
3 Introduction to Toxicology
4 The Importance of Dosage
5 Types of Toxic Substances
6 Toxicological Effects
7 Factors that Influence Toxicity
Module Exam
Module 2 – Waste Site Operations 8 Module Overview
9 Site Characterization and Analysis
10 Site Control Tactics and Strategy
11 Job Hazard Analysis
12 Handling Drums and Containers
13 Sampling Methods and Procedures
14 Managing Chemical Spills
15 Introduction to Decontamination
16 Emergency Response
17 Understanding Temporary HAZWOPER Worksites
Module Exam
Course Conclusion 18 Summary and Conclusion

Version 3 Includes: Recognition, Detection Basics, and Containment

This version consists of 19 sections broken down into 2 modules. Since they often build on one another, sections are taken sequentially in the order listed below.

Module Section Title
Course Introduction 1 Course Overview
Module 1 – Physical Hazards 2 Module Overview
3 Walking and Working Surfaces
4 Fall Prevention and Protection
5 Electrical Hazards
6 Introduction to Confined Spaces
7 Cold Illnesses and Injuries
8 Heat Illnesses and Injuries
9 Heat Illness Prevention
10 Using the Heat Index
11 Other Physical Hazards
Module Exam
Module 2 – Basic PPE Overview 12 Module Overview
13 Introduction to Personal Protective Equipment
14 Introduction to Respiratory Protection
15 Introduction to Chemical Protective Clothing
16 Introduction to Monitoring and Detection
17 PPE for the Head, Eyes, Face, and Ears
18 PPE for the Hands and Feet
Module Exam
Course Conclusion 19 Summary and Conclusion

Version 4 Includes: Using Respirators and CPC

This version consists of 18 sections broken down into 2 modules. Since they often build on one another, sections are taken sequentially in the order listed below.

Module Section Title
Course Introduction 1 Course Overview
Module 1 – Using Respiratory Protection 2 Module Overview
3 Using Respiratory Protection
4 Types of Respiratory Protection
5 Respirator Selection and Use
6 Respirator Medical Evaluation
7 Respirator Fit Testing
8 Respirator Training Requirements
9 Respirator Maintenance and Care
Module Exam
Module 2 – Using Chemical Protective Clothing (CPC) 10 Module Overview
11 Medical Considerations for Wearing CPC
12 Using Chemical Protective Clothing
13 Chemical Protective Clothing Selection
14 Chemical Protective Clothing Classifications
15 Donning and Doffing CPC
16 Inspection, Storage, and Maintenance of CPC
17 Decontaminating and Cleaning CPC
Module Exam
Course Conclusion 18 Summary and Conclusion

Exams

Each exam consists of 10 questions randomly selected from a large pool of questions. A 70% score or better is required to pass each exam.

This course has one exam for each corresponding module. Students are required to complete an exam after completing all course sections. There is no final exam.

If a student does not pass an exam the first time, they may retake the exam as many times as necessary in order to pass.

Additional Training

This course is designed to help workers meet the OSHA 8 Hour HAZWOPER Refresher requirements. If this course takes less than 8 hours to complete, it should be combined with other training conducted throughout the year to meet the 8-hour requirement. This additional training can come from hands-on, job- or company-specific training, or even tailgate safety meetings.

Workers must receive additional training, when required by Federal and State OSHA and EPA standards, on the specific hazards of their job.

Training providers should be used to ensure credibility and augment a company’s training program. Therefore, in addition to the training provided by an outside party, a student should receive site-specific training that is supplied by their own company. This training should target the company’s unique approach to hazard prevention, including the use of site-specific equipment, health and safety policies, and emergency procedures. As a rule, this company specific training should be well documented.

The bottom line in ALL SITUATIONS is that employers are required to ensure that their employees are adequately trained to do their job.

Mobile Version

We’re excited to announce that this course is now available in HTML 5, making it more compatible with the browser on your mobile device (e.g., smartphone or tablet).

Many of our existing courses are presented using Adobe Flash Player and require additional software that may not be available on your mobile device. By comparison, this course requires only the most recent version of your mobile device's web browser.

Mobile Pros & Cons

Mobile versions of this sort of training are new, but below are some Pros and Cons that we have noticed during our extensive testing.

Pros

  • No computer needed
  • Tablet mobility
  • Tablet screen graphics

Cons

  • Smartphone screens can be too small to see
  • Mobile browsers react differently than computer browsers
  • Phone calls can interrupt training

During our testing we noticed that tablets work much better than smartphones, simply due to their screen size. The newer the device, the better the result. We are also aware that the course will not work on the first generation iPad, nor older Android Tablets.

Growing Pains

Because this is a Beta version of our course, you may encounter some issues as we work out the kinks.

Your Mobile Browser

While HTML5 makes taking this course on mobile devices possible, not all mobile browsers are optimized for HTML5, meaning you may not have complete functionality. If you have difficulty taking this course using the browser on your mobile device, you may need to use a different browser.

Test the functionality of your browser using HTML5 and compare it to the performance of other browsers. If you find other browsers are more compatible than your own, you may want to make the switch.

FAQs

Q – Why are there different versions of this class?
A – The multiple course versions are designed with the intention of offering you more options for your training. The more applicable your training can be toward your job, the better.

Q – Are all versions accepted by OSHA?
A – Yes, all versions meet OSHA requirements. OSHA allows flexibility in training and prefers training to be individual specific.

Q – Which version should I take?
A – Pick the material that seems most relevant to you and your job, or that you are most interested in.

Q – Will I receive the same certificate?
A – Yes, the certificate you receive is the same and does not vary depending on which version you choose.

Q – What if it has been longer than 12 months since I received my refresher training?
A – This does not mean you must take the initial training all over again. Per OSHA, “If the date for refresher training has lapsed, the need to repeat the initial training must be determined based on the employee’s familiarity with safety and health procedures used on site. The employee should take the next available refresher training course. There should be a record in the employee’s file indicating why the training has been delayed and when the training will be completed.”

Q – Can I use my one-time 8 Hour Initial HAZWOPER Supervisor training course as my refresher training for that year?
A – No, OSHA would expect a general hazardous waste site worker who is becoming a supervisor or manager to receive at least 16 hours of training during the year they become a supervisor: 8 hours of management and supervisory training in addition to 8 hours of employee refresher training. HAZWOPER requires that supervisors and managers be trained and given supervised field experience to at least the level of the employees who they will oversee, and have at least eight additional hours of specialized training on the topics listed in 1910.120(e)(4).

Q – How long will this course take to complete?
A – Our courses are set up to take a specific amount of time. Some students may get through the training more quickly, while others may actually take longer to complete their training. Remember, this training should be used as an intricate tool in the context of an overall training program; it can be combined with other training throughout the year in order to meet any hour requirements needed.

Q – Do I have to finish the course in one sitting?
A – No, our courses are designed so you can start and stop as needed, allowing you to break the training up over a longer period of time. Our system will keep track of your progress, enabling you to resume where you left off upon your next login. It is important that once you start a section, you complete that section or you will need to start that section over from the beginning upon your return.

Q – Can I take the course from more than one computer?
A – Yes, you can take the online portion by signing in with your username and password from any location and computer with high-speed internet access. However, each computer does need to meet our basic system requirements for viewing our online courses.

Q – Will I receive a certificate for this course?
A – Yes, once you have completed a course, you are able to download, save or print a certificate of completion from your student account. Certificates are created in a PDF format. Users must have the latest version of Adobe Reader before attempting to download the completion certificate.

Q – Will I receive a wallet ID card?
A – In addition to the PDF certificate, this course also comes with the option to purchase a laminated wallet ID card for $5.00. This card will be mailed from our main office in southern California. Wallet ID cards are created and mailed either the same or next business day, depending on what time the course is completed. Please allow for appropriate mail time, as this may vary by location.