Overview
Who Should Take This Course?
Students looking to take the OSHA 40 Hour HAZWOPER training from their computer via the internet, we offer a course that can be completed entirely online. By taking the course online, students can avoid traveling or using vacation time, and complete the course at their own pace wherever they have a computer with internet access that meets the courses simple system requirements.
Students that take this course are those workers that a) will receive follow-up instruction with site-specific equipment training from their employer; or b) will not use safety equipment on site.
In lieu of the hands-on training a student would receive in a classroom setting, students will view over 50 short video clips of equipment demonstration. These demonstrations will include methods for donning and doffing, equipment demonstrations, and monitoring and detection devices. Students will have the opportunity to view these videos as often as they like.
Most students select the online option for 40 Hour HAZWOPER training because they still require on-site, site-specific equipment training even after taking a classroom course. This is due to the fact that the equipment used as part of instruction in the classroom may not be the exact equipment the student will use as part of their job.
The bottom line is that you should receive employer-provided training in the use of any equipment you may use as part of your job. This employee-provided training should be well documented.
Objectives
The objectives of this course are to meet the Federal OSHA HAZWOPER training requirements of 29 CFR 1910.120(e)(3)(i) for General Industry and 1926.65(e)(3)(i) for Construction. This course is also intended to meet any HAZWOPER training requirements for EPA and State OSHA regulations.
Per 29 CFR 1910.120(e)(3)(i) and 1926.65(e)(3)(i)
General site workers (such as equipment operators, general laborers, and supervisory personnel) engaged in hazardous substance removal or other activities which expose or potentially expose workers to hazardous substances and health hazards shall receive a minimum of 40 hours of instruction off the site, and a minimum of three days actual field experience under the direct supervision of a trained experienced supervisor.
Topics
This course consists of 80 sections grouped into 10 modules. Students are required to take each section in sequential order as listed below.
| Module |
Section |
Course Title |
| Introduction |
| 1 |
40 Hour HAZWOPER Course Overview |
| Module 1 |
| Legal Issues |
| 2 |
Module Overview |
| 3 |
Introduction to OSHA |
| 4 |
Introduction to HAZWOPER |
| 5 |
HAZWOPER Training |
| 6 |
Regulatory Compliance |
| 7 |
Safety and Health Program |
| 8 |
Medical Surveillance |
| Module Exam |
| Module 2 |
| Toxicology |
| 9 |
Module Overview |
| 10 |
Introduction to Toxicology |
| 11 |
The Importance of Dosage |
| 12 |
Types of Toxic Substances |
| 13 |
Toxicological Effects |
| 14 |
Factors That Influence Toxicity |
| Module Exam |
| Module 3 |
| Chemical Hazards |
| 15 |
Module Overview |
| 16 |
Introduction to Industrial Hygiene |
| 17 |
Biological Hazards |
| 18 |
The Hazard Communication |
| 19 |
Physical and Chemical Properties |
| 20 |
Introduction to Radiation |
| Module Exam |
| Module 4 |
| Physical Hazards |
| 21 |
Module Overview |
| 22 |
Walking and Working Surfaces |
| 23 |
Fall Prevention and Protection |
| 24 |
Electrical Hazards |
| 25 |
Introduction to Confined Spaces |
| 26 |
Cold Illnesses and Injuries |
| 27 |
Heat Illnesses and Injuries |
| 28 |
Heat Illness Prevention |
| 29 |
Using the Heat Index |
| 30 |
Other Physical Hazards |
| Module Exam |
| Module 5 |
| Basic PPE Overview |
| 31 |
Module Overview |
| 32 |
Introduction to Personal Protective Equipment |
| 33 |
Introduction to Respiratory Protection |
| 34 |
Introduction to Chemical Protective Clothing |
| 35 |
Introduction to Monitoring and Detection |
| 36 |
PPE for the Head, Eyes, Face, and Ears |
| 37 |
PPE for the Hands and Feet |
| Module Exam |
| Module 6 |
| Waste Site Operations |
| 38 |
Module Overview |
| 39 |
Site Characterization and Analysis |
| 40 |
Site Control Tactics and Strategy |
| 41 |
Job Hazard Analysis |
| 42 |
Handling Drums and Containers |
| 43 |
Sampling Methods and Procedures |
| 44 |
Managing Chemical Spills |
| 45 |
Introduction to Decontamination |
| 46 |
Emergency Response |
| 47 |
Understanding Temporary HAZWOPER Worksites |
| Module Exam |
| Module 7 |
| Using Respiratory Protection |
| 48 |
Module Overview |
| 49 |
Using Respiratory Protection |
| 50 |
Types of Respiratory Protection |
| 51 |
Respirator Selection and Use |
| 52 |
Respirator Medical Evaluation |
| 53 |
Respirator Fit Testing |
| 54 |
Respirator Training Requirements |
| 55 |
Respirator Maintenance and Care |
| Module Exam |
| Module 8 |
| Using Chemical Protective Clothing (CPC) |
| 56 |
Module Overview |
| 57 |
Medical Considerations for Wearing CPC |
| 58 |
Using Chemical Protective Clothing |
| 59 |
Chemical Protective Clothing Selection |
| 60 |
Chemical Protective Clothing Classifications |
| 61 |
Donning and Doffing CPC |
| 62 |
Inspection Storage and Maintenance of CPC |
| 63 |
Decontaminating and Cleaning CPC |
| Module Exam |
| Module 9 |
| Using Monitoring and Detection Devices |
| 64 |
Module Overview |
| 65 |
Preventing Sparks During Gas Detection |
| 66 |
Sensor Technology |
| 67 |
Types of Gas Detection Systems |
| 68 |
Using Colorimetric Tubes |
| 69 |
Using Combustible Gas Indicators |
| 70 |
FIDs and PIDs |
| 71 |
Other Detection Devices |
| Module Exam |
| Module 10 |
| Video Equipment Familiarization |
| 72 |
Module Overview |
| 73 |
Video - Respirators |
| 74 |
Video - Level A |
| 75 |
Video - Level B |
| 76 |
Video - CPC Components and Accessories |
| 77 |
Video - Monitoring and Detection |
| 78 |
Video - Miscellaneous Tools and Equipment |
| 79 |
Video - Decontamination |
| Conclusion |
| 80 |
Summary and Conclusion |
Exams
This course has 9 module exams based upon the course’s first 9 modules. Students are required to complete the exam after completing all course sections. There is no final exam.
The exam consists of 10 questions randomly selected from a large pool of questions. A 70% score or better is required to pass each exam.
If a student does not pass an exam the first time, they may retake the exam as many times as necessary in order to pass.
Additional Training
Workers must receive additional training, when required by Federal and State OSHA and EPA standards, on the specific hazards of their job.
Training providers should be used to ensure credibility and augment a company’s training program. Therefore, in addition to the training provided by an outside party, a student should receive site-specific training that is supplied by their own company. This training should target the company’s unique approach to hazard prevention, including the use of site-specific equipment, health and safety policies, and emergency procedures. As a rule, this company specific training should be well documented.
The bottom line in ALL SITUATIONS is that employers are required to ensure that their employees are adequately trained to do their job.
Mobile Version
We’re excited to announce that this course is now available in HTML 5, making it more compatible with the browser on your mobile device (e.g., smartphone or tablet).
Many of our existing courses are presented using Adobe Flash Player and require additional software that may not be available on your mobile device. By comparison, this course requires only the most recent version of your mobile device's web browser.
Mobile Pros & Cons
Mobile versions of this sort of training are new, but below are some Pros and Cons that we have noticed during our extensive testing.
Pros
- No computer needed
- Tablet mobility
- Tablet screen graphics
Cons
- Smartphone screens can be too small to see
- Mobile browsers react differently than computer browsers
- Phone calls can interrupt training
During our testing we noticed that tablets work much better than smartphones, simply due to their screen size. The newer the device, the better the result. We are also aware that the course will not work on the first generation iPad, nor older Android Tablets.
Growing Pains
Because this is a Beta version of our course, you may encounter some issues as we work out the kinks.
Your Mobile Browser
While HTML5 makes taking this course on mobile devices possible, not all mobile browsers are optimized for HTML5, meaning you may not have complete functionality. If you have difficulty taking this course using the browser on your mobile device, you may need to use a different browser.
Test the functionality of your browser using HTML5 and compare it to the performance of other browsers. If you find other browsers are more compatible than your own, you may want to make the switch.
FAQ
Below are some frequently asked questions specific to this course.
Q – How long will this course take to complete?
A – Our courses are set up to take a specific amount of time. Some students may get through the training more quickly, while others may actually take longer to complete their training. Remember, this training should be used as an intricate tool in the context of an overall training program; it can be combined with other training throughout the year in order to meet any hour requirements needed.
Q – Do I have to finish the course in one sitting?
A – No, our courses are designed so you can start and stop as needed, allowing you to break the training up over a longer period of time. Our system will keep track of your progress, enabling you to resume where you left off upon your next login. It is important that once you start a section, you complete that section or you will need to start that section over from the beginning upon your return.
Q – Can I take the course from more than one computer?
A – Yes, you can take the online portion by signing in with your username and password from any location and computer with high-speed internet access. However, each computer does need to meet our basic system requirements for viewing our online courses.
Q – Will I receive a certificate for this course?
A – Yes, once you have completed a course, you are able to download, save or print a certificate of completion from your student account. Certificates are created in a pdf format. Users must have the latest version of Adobe Reader before attempting to download the completion certificate.
