HazwoperTraining.com
24 Hour Hazardous Materials Technician Level III Responder Online

24 Hour Hazardous Materials Technician Level III Responder

Level III Responder training including an Online Interactive Tabletop Exercise™

Overview

HAZMAT responders at the Technician level are trained to respond to releases or potential releases in an offensive fashion. Unlike responders at the First Responder Operations (FRO) level who will seek to contain and isolate a release at a distance from the point of origin, workers at the Technician level will take steps to control or stop the release at its source.

Hazmat technicians are typically members of Hazmat Teams, which are also known as Spill Response Teams, or Emergency Response Teams, when they respond to chemical spills. This training is also referred to as Hazmat Tech, Level III Responder, Industry Tech, or any combination of these terms.

OSHA requires HAZMAT Technicians to have a minimum of 24 hours of training in accordance with section (q) of the HAZWOPER regulation.

Who Should Take This Course?

This OSHA 24 Hour HAZMAT Technician Online course is designed to help first responders meet the OSHA HAZWOPER requirements for HAZMAT Technician training. This course is meant for initial HAZMAT Technician training only. For refresher training, please visit our 4 Hour HAZMAT Technician Refresher or 8 Hour HAZMAT Technician Refresher training page.

Course Format

All 24 hours of training for this course is provided online.

OSHA requires workers to have adequate training in the use of specialized equipment in a training environment prior to using it in a hazardous environment. For this reason, additional, company-specific training in the use of worksite-specific equipment may be required.

Additional Training

This 24 Hour HAZMAT Technician course provides valuable Hazmat Technician training information that applies to a general population of employees. However, this course is not meant to replace company-specific or function-specific training provided by your employer on the hazards, equipment, engineering and administrative controls, safe work practices, policies and procedures, and emergency plans specific to your role and workplace.

This training requires annual recertification. You can receive this training by taking our 4 Hour HAZMAT Technician Refresher or 8 Hour HAZMAT Technician Refresher course.

In ALL situations, employers are required to ensure their employees are adequately trained to do their job.

Objectives

This OSHA 24 Hour Hazardous Materials Technician Online course is designed to meet the OSHA HAZWOPER training requirements of 29 CFR 1910.120(q)(6)(iii) for general industry and 29 CFR 1926.65(q)(6)(iii) for construction, as well as any EPA or State OSHA training requirements.

Per 29 CFR 1910.120(q)(6)(iii) and 29 CFR 1926.65(q)(6)(iii):

Hazardous materials technician. Hazardous materials technicians are individuals who respond to releases or potential releases for the purpose of stopping the release. They assume a more aggressive role than a first responder at the operations level in that they will approach the point of release in order to plug, patch or otherwise stop the release of a hazardous substance. Hazardous materials technicians shall have received at least 24 hours of training equal to the first responder operations level and in addition have competency in the following areas and the employer shall so certify:

  • Know how to implement the employer’s emergency response plan.
  • Know the classification, identification and verification of known and unknown materials by using field survey instruments and equipment.
  • Be able to function within an assigned role in the Incident Command System.
  • Know how to select and use proper specialized chemical personal protective equipment provided to the hazardous materials technician.
  • Understand hazard and risk assessment techniques.
  • Be able to perform advance control, containment, and/or confinement operations within the capabilities of the resources and personal protective equipment available with the unit.
  • Understand and implement decontamination procedures.
  • Understand termination procedures.
  • Understand basic chemical and toxicological terminology and behavior.

Learning Objectives

Upon completion of this course, the student will be able to:

  • Describe laws and regulations that apply to the Hazmat Emergency Responder;
  • Describe the training requirements for the Hazmat Emergency Responder;
  • Explain the importance of an effective Emergency Response Plan;
  • List the components of an effective Medical Surveillance Program;
  • Implement the Incident Command System as part of an emergency response;
  • Reference the DOT-Emergency Response Guidebook (ERG) as guidance for initial actions at the scene of a hazardous materials incident;
  • Perform effective scene size up during hazardous materials emergency response;
  • Recognize hazardous materials incidents and research their hazards utilizing various reference sources;
  • Understand basic toxicology principles and how they relate to chemical exposure;
  • Select and utilize proper personal protective equipment (PPE) related to the Hazmat Emergency Responder;
  • Understand medical considerations of wearing Chemical Protective Clothing (CPC);
  • Understand decontamination methods and the principles of decontamination;
  • Understand the physical and chemical properties of hazardous substances;
  • Understand the importance of a Site Specific Safety Plan;
  • Perform hazardous substance spill and containment and control techniques;
  • Understand the detection and monitoring tools available to the Hazmat Emergency Responder; and
  • Describe incident termination procedures and Post Incident Analysis techniques.

Course Topics

Our Online 24 Hour Hazardous Materials Technician Course is broken down into three 8 Hour Parts:

Part 1 – First Responder Operations – FRO (Day 1 of 3)

Module Section Title
Module 1 1 Introduction to Hazmat Emergency Response
2 Hazmat Emergency Responders
3 Hazardous Materials, Substances and Wastes
4 Recognizing Hazmat Incidents
Module 1 Exam
Module 2 5 Emergency Response Guidebook (ERG) Overview
6 ERG White Pages Quiz
7 ERG Yellow-bordered & Blue-bordered Pages
8 ERG Yellow-bordered & Blue-bordered Pages Quiz
9 ERG Orange-bordered Pages
10 ERG Orange-bordered Pages Quiz
11 ERG Green-bordered Pages
12 ERG Green-bordered Pages Quiz
Module 2 Exam
Module 3 13 Managing Hazmat Incidents for the FRO
14 Basic Actions for all First Responders
Module 3 Exam
Module 4 15 Road Trailer Identification
16 Rail and Other Modes of Transportation
17 Other Hazmat Container Identification
Module 4 Exam
Module 5 18 Introduction to Personal Protective Equipment (PPE)
19 Fire Control on a Hazmat Incident
20 FRO Entry Operations at a Hazmat Incident
21 Decontamination and the FRO
22 FRO Mitigation
23 FRO Summary and Conclusion
Module 5 Exam

Part 2 – Transitioning from a FRO to a HAZMAT Technician (Day 2 of 3)

Module Section Title
Module 1 1 Introduction to Part 2 The Hazardous Materials Technician
2 Regulatory Requirements for the Hazmat Technician
3 Medical Surveillance and the Hazmat Technician
4 Emergency Response Planning
Module 1 Exam
Module 2 5 Hazmat Incident Command and the Public Sector Response
6 Hazmat Group Functional Leaders
7 Additional ICS Hazmat Group Positions
8 Hazmat Incident Command and the Private Facility Response
Module 2 Exam
Module 3 9 Hazardous Materials Referencing
10 Introduction to Toxicology
11 Toxicology Exposures and Effects
12 Exposure Standards and Guidelines
13 Physical and Chemical Properties
Module 3 Exam
Module 4 14 Site Control
15 Incident Safety
16 Hazard and Risk Assessment
17 Hazmat Technician Mitigation Techniques
18 Hazmat Technician Decontamination
19 Special Considerations
Module 4 Exam
Module 5 20 Hazmat Incident from Notification to Termination Part 1
21 Hazmat Incident from Notification to Termination Part 2
22 Summary and Conclusion for Part 2

Part 3 – Responder Equipment and Online Tabletop Exercise (Day 3 of 3)

Module Section Title
Module 1 1 Introduction to Part 3
2 Introduction to Respiratory Protection
3 Types of Respiratory Protection
4 Respirator Video Clips
Module 1 Exam
Module 2 5 Chemical Protective Clothing Overview
6 Medical Considerations for Chemical Protective Clothing
7 Chemical Protective Clothing Program
8 Chemical Protective Clothing Selection
9 Chemical Protective Clothing Classifications
10 Chemical Protective Clothing Classifications
11 Doffing Chemical Protective Clothing
12 Decontaminating Chemical Protective Clothing
13 Inspection and Maintenance of Protective Clothing
14 Training and Monitoring for Protective Clothing
15 Level A Video Section
16 Level B Video Section
17 Other Protective Equipment Video Clips
Module 2 Exam
Module 3 18 Gas Detection Basics
19 Preventing Sparks
20 Sensor Technology
21 Types of Gas Detection Systems
22 Colorimetric Tubes and Diffusion Tubes
23 Flammability and CGI’s (Combustible Gas Indicators)
24 PIDs and FIDs
25 Other Detection Devices
26 Monitoring and Detection Video Clips
27 Miscellaneous Tools Equipment Video Clips
Module 2 Exam
Module 4 28 Scenario & Exercise
29 Summary and Conclusion

Accreditation

This 24 Hour HAZMAT Technician Online course was designed by OSHA Certified Outreach Trainers with your safety and learning as a top priority. It is OSHA accepted and meets the requirements for 29 CFR 1910.120(q)(6)(iii) and 1926.56(q)(6)(iii).

Certification

Once the course is complete, you will have immediate access to a Course Completion Certificate provided in PDF format that you can download, save, or print.

FAQ

Below are some frequently asked questions specific to this course.

Q – Can I really take the 24 Hour Hazmat Technician training entirely online?
A – Yes. While the initial training can be taken entirely online, to become a Hazardous Materials Technician OSHA requires employees to be trained on how to use any protective equipment that they need as part of their job prior to using that equipment during an emergency response. This is the case whether the student takes the course online or takes the course in a classroom setting.

Q – How is this class different from the 24 Hour HAZWOPER?
A – The OSHA 24 Hour HAZWOPER training is intended for cleanup operations under section (e) of the HAZWOPER Regulation, while 24 Hour HAZMAT Technician training is a Level III Emergency Responder Training level intended for those that respond to hazardous materials releases as part of a HAZMAT team trained under section (q) of the HAZWOPER Regulation.

Q – How long will this course take to complete?
A – Our courses are set up to take a specific amount of time. Some students may get through the training more quickly, while others may actually take longer to complete their training. Remember, this training should be used as an intricate tool in the context of an overall training program; it can be combined with other training throughout the year in order to meet any hour requirements needed.

Q – Do I have to finish the course in one sitting?
A – No, our courses are designed so you can start and stop as needed, allowing you to break the training up over a longer period of time. Our system will keep track of your progress, enabling you to resume where you left off upon your next login. It is important that once you start a section, you complete that section or you will need to start that section over from the beginning upon your return.

Q – Can I take the course from more than one computer?
A – Yes, you can take the online portion by signing in with your username and password from any location and computer with high-speed internet access. However, each computer does need to meet our basic system requirements for viewing our online courses.

Q – Will I receive a certificate for this course?
A – Yes, once you have completed a course, you are able to download, save or print a certificate of completion from your student account. Certificates are created in a pdf format. Users must have the latest version of Adobe Reader before attempting to download the completion certificate.